JUKI IP-100 Engineer's Manual page 72

2) Mechanism section of the face plate section
Apply the exclusive grease supplied as accessories to all components of the rocking mechanism in the
face plate section.
However, do not apply grease to the needle bar of lubricating type (ASS and ASU).
| When applying grease, the needle bar is stained in black and the sewing product is in danger of being
stained.
Apply the exclusive grease supplied as accessories to the whole moving components of the mechanism.
No. Name of part
1
Needle bar crank rod oil wick
2
Needle bar support base
shaft upper metal felt
3
Needle bar bracket guide
4
Needle bar crank rod guide
5
Needle bar bracket
6
Needle bar support base
guide pin A
7
Needle bar support base
guide pin B
8
Needle bar
9
Needle bar support base
shaft upper/ lower metals
Lubricating oil
Apply JUKI
genuine No. 1 oil.
Apply JUKI
genuine No. 1 oil.
Exclusive grease
Exclusive grease
Exclusive grease
Exclusive grease
Exclusive grease
Exclusive grease
Exclusive grease
2
8
9
7
68
− −
Part No. Remarks
MDFRX1600C0 Excluding dry-head type
MDFRX1600C0 Excluding dry-head type
40006323
Apply grease so that the hole
40006323
for screwdriver of needle bar
crank rod guide is filled up as
the standard.
40006323
40006323
40006323
Dry-head type only
40006323
Dry-head type only
40006323
1
3
4
5
6