Adjusting The Lubrication Mechanism (Ass And Asu Only); Adjusting The Position Of The Thread Draw-Out Wire (For The Machine With Thread Trimmer Only) - JUKI IP-100 Engineer's Manual

(32) Adjusting the lubrication mechanism (ASS and ASU only)

™ Forced lubrication is performed to the hook by means of the plunger pump placed in the hook shaft
front bushing in the machine head (ASS, ASU)
(33) Adjusting the position of the thread draw-out wire
(For the machine with thread trimmer only)
Standard Adjustment
1
2
Upper marker line
3
2
Lower marker line
Standard Adjustment
2
3
B
A
(A B)
4
38
− −
Oiler
5
1
0.5 to 1 mm
3