Figure 2.7.4.2: App - Wi-Fi Settings - 3DR Solo User Manual

2.7.5 Update
Before your first flight, use the App to perform the required first-flight update of Solo and the Controller. The
Controller will prompt you for the update with the preflight update alert. Ensure that both the controller and Solo
are powered, the Controller has at least 50% battery remaining, and the app is connected to Solo Wi-Fi. The total
update process can take up to 10 minutes.
To start the update, open the Settings menu in the App, and select Software Update.
Because your mobile device has never connected to this Solo before, you will need to link your device with Solo
Wi-Fi (SoloLink).

Figure 2.7.4.2: App - Wi-Fi Settings

ARTOO UPDATE SCREEN FEEDBACK V10C
preflight update
Required before first flight!
Use 3DR Solo App to update
Figure 2.7.5.1: Controller Preflig
Controller updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating
Figure 2.7.5.2: App - Software Update
Controller updated
Please reconnect to Sololink wifi
Press to continue
waiting for Solo
Press when LEDs are green
Figure 2.7.5.3: App - Connecting Instructions
Update Requirement Screen
ht Update Prompt
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
Returns user to hold-Fly-button screen
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
12
FLY
to start motors
Hold
FLY
Cable Cam Orbit
Update Timeout
If update does not c
"update-unsuccessf
Update failure
If update fails, displa
screen
Update unsuccessful (A
update
Please use
the
Prompt stays on screen u
12 Post Unlock Behavior
After system is unlocked,
versions that were last su
(Even if they have failed i