Figure 3.2.4.1: Mounting The Gimbal - 3DR Solo User Manual

3. When the plate is inserted and resting flush with the Solo Shell, tighten each of the three captive screws.
If the plate isn't resting flush with the Solo Shell, the most likely cause is that the screws didn't catch correctly. If the
screws are misaligned, do not try to tighten them. Back out any crooked screws with the screwdriver, then realign
them manually before tightening with the screwdriver.
3.2.5 Camera Installation
The 3-Axis Solo Gimbal holds your GoPro® HERO 3, 3+ or 4. To install your GoPro camera, follow these directions:
1. To create space for your GoPro inside the camera housing, move the the rubber HDMI plug out and away
from the camera housing.
2. Slide your GoPro into place from the front and gently press it in until it is flush with the back of the camera
housing.

Figure 3.2.4.1: Mounting the Gimbal

Figure 3.2.5.1: HDMI Plug Positioning
Have extended feet? (Optional)
Install for added clearance.
19