Table of Contents
Advertisement
2.6.4
Update
Before your first flight, use the App to perform the required first-flight update of Solo and the controller. The
Controller will prompt you for the update with the preflight update alert. Ensure that both the controller and Solo
are powered, the controller has at least 50% battery remaining, and the app is connected to Solo Wi-Fi. The total
update process can take up to 10 minutes.
To start the update, open the Settings menu in the App, and select Software Update.
Because your mobile device has never connected to this Solo before, you will need to link your device with Solo
Wi-Fi (SoloLink).
Figure 2.6.3.2: App - Wi-Fi Settings
ARTOO UPDATE SCREEN FEEDBACK V10C
preflight
update
Required before first flight!
Use 3DR Solo App to update
Figure 2.6.4.1: Controller Preflight Update Prompt
Controller
updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating
Controller
updated
Figure 2.6.4.2: App - Software Update
Please reconnect to Sololink wifi
Press
to continue
waiting
for Solo
Press
when LEDs are green
Figure 2.6.4.3: App - Connecting Instructions
Update Requirement Screen
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
12
FLY
Hold
to start motors
FLY
Cable Cam
Returns user to hold-Fly-button screen
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Update Timeout
If update does not
"update-unsucces
Update failure
If update fails, disp
screen
Update unsuccessful (
update
Please us
the
Orbit
Prompt stays on screen
Post Unlock Behavior
After system is unlocke
versions that were last s
(Even if they have failed
12
Advertisement
Table of Contents
