Figure 2.7.5.8: App - Update Disconnection Confirmation - 3DR Solo User Manual

Because the Controller must restart as part of the update process, your device will lose its connection to Solo Wi-Fi.
When you see the following screen, select Next to continue.
The Controller restarts and displays a green checkmark to indicate its update was successful. When you see the
green checkmark on the controller, reconnect to Solo Wi-Fi in the app and press A on the controller to continue the
update.
After you press A, Solo restarts to complete the update. While Solo restarts, the controller displays "waiting for
Solo."
When the update is complete, Solo's LEDs turn green, the controller returns to the standard takeoff screen, and the
App shows that the software is up to date. After displaying green, Solo's LEDs return to the standard white-and-red
pattern. If you do not see white-and-red LEDs after a few minutes following the update, restart Solo.
ARTOO UPDATE SCREEN FEEDBACK V10C
preflight update
Required before first flight!
Use 3DR Solo App to update

Figure 2.7.5.8: App - Update Disconnection Confirmation

Controller updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating
Figure 2.7.5.9: Controller Update Complete Displays
Controller updated
Please reconnect to Sololink wifi
Press to continue
waiting for Solo
Press when LEDs are green
Figure 2.7.5.10: Controller - Waiting for Solo
Figure 2.7.5.11: App - Update Success
ARTOO UPDATE SCREEN FEEDBACK V10C
preflight update
Update Requirement Screen
Required before first flight!
Use 3DR Solo App to update
Controller updating
Controller update in progress screen
Update will take about 5 minutes
Is displayed after user initiates update in app.
Please ensure charger is connected
Persists until controller update is successful.
Controller may go dark while updating
Controller updated
Please reconnect to Sololink wifi Update complete feedback.
Tells the user that controller update was successful.
Press to continue HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
waiting for Solo
Waiting for Solo
Persists until Solo reconnects
or
Press when LEDs are green
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
Returns user to hold-Fly-button screen
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Update Requirement Screen
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update complete (Connects to matching version Solo)
12
Hold
FLY
12
FLY
Cable Cam
Returns user to hold-Fly-button screen
Hold to start motors
FLY
Green Solo LEDs (showing update complete) change to
standard red and white when this screen is displayed
Cable Cam Orbit
Update Timeout
If update does not complete
"update-unsuccessful" screen
Update failure
If update fails, display "update
screen
FLY
Update
If upda
Update
to start motors
Update unsuccessful (Artoo and
Orbit
update uns
Please use 3DR S
the update
Prompt stays on screen until upda
Post Unlock Behavior
After system is unlocked, user shou
versions that were last successfully
(Even if they have failed in their mo
14