Figure 3.2.5.2: Attach Gopro - 3DR Solo User Manual

3. Take the rubber HDMI plug and insert into the exposed side of your GoPro. This simultaneously fastens the
GoPro into place and secures the HDMI connection. Your GoPro is now installed!
3.2.6 Add Balance Weights
Out of the box, the Solo Gimbal is perfectly weighted for use with the GoPro HERO4 Black. If you are using the
GoPro HERO4 Silver or the GoPro HERO3+, then you need to add balance weights to optimize these cameras for
use with the Solo Gimbal. To balance your GoPro, attach the corresponding balance weights to the threaded inserts
on the top and bottom of the camera housing, as shown following.
GoPro Weight Balancing
HERO4 Black
HERO4 Silver
HERO3+ Silver

Figure 3.2.5.2: Attach GoPro

Figure 3.2.5.3: Fasten Camera
®
No blalance weights needed
Add the 2.7g balance weights
Add the 6g balance weights
Figure 3.2.6.1: GoPro Weight Balancing
20