Figure 2.7.5.4: App - Instructions List - 3DR Solo User Manual

Then follow these instructions to connect to Solo Wi-Fi:
Once connected, return to the App and you will be notified of the current version you are about to update to. To
continue, select Download Update. For this step you will need an Internet connection, either cellular data or Wi-Fi. If
you opt to use Wi-Fi, you'll need switch from SoloLink to your Wi-Fi network.
When the App detects an active connection with the controller, it prompt you to begin the update. (Solo and the
controller must be powered on to connect to Solo Wi-Fi.) To start the update, select Begin.
While the update is in progress, the controller shows the controller updating display. The controller completes a full
restart as part of the update process, which can take up to five minutes.

Figure 2.7.5.4: App - Instructions List

Figure 2.7.5.5: App - Download Update
ARTOO UPDATE SCREEN FEEDBACK V10C
Figure 2.7.5.6: App - Start Update
preflight update
Required before first flight!
Use 3DR Solo App to update
Controller updating
Update will take about 5 minutes
Please ensure charger is connected
Controller may go dark while updating
Figure 2.7.5.7: Controller - Updating
Controller updated
Please reconnect to Sololink wifi
Press to continue
waiting for Solo
Press when LEDs are green
Update Requirement Screen
Controller update in progress screen
Is displayed after user initiates update in app.
Persists until controller update is successful.
Update complete feedback.
Tells the user that controller update was successful.
HAPTIC: Three 20 millisecond pulses,
to communicate update completion.
A-Press required to dimiss (same as current implementation)
Waiting for Solo
Persists until Solo reconnects
or
Artoo auto-shutdown
Update Timeout
If update does not comple
"update-unsuccessful" scr
Update failure
If update fails, display "upd
screen
13
Upd
If up
Upd