Selfie - 3DR Solo User Manual

6.3

Selfie

In Selfie, Solo flies a smooth up-and-back path to capture a subject in a cinematic establishing shot. Before starting
a Selfie shot, always ensure that there is a clear path 200 feet (61 m) behind and above Solo. Once you activate
Selfie mode, Solo flies up and away from the subject to a point 164 feet (50 m) from the subject at 82 feet (25 m)
altitude. You can change these default distances with Selfie Options.
1 Distance away (default 164 ft.)
2 Altitude up (default 82 ft.)
3 Flight path
Always ensure that there is a clear path 200 feet (30 m) behind and
above Solo before starting Selfie. Press To stop Solo at any time,
press Pause. To switch to manual control at any point, press Fly.
6.3.1 Selfie Setup
To start Selfie, fly Solo to a starting point, facing the subject from approximately 10 feet away, and select Selfie from
the Shot List. The app prompts you to position Solo so the camera is facing you and to ensure that the path it will
follow (up and back) is clear.
6.3.2 Selfie Operation
To move Solo along the Selfie path, tap the forward and back arrows in the App, labeled "Fly out" and "Return,"
respectively. The default cruise speed when using Selfie is 9 mph (4 m/s).
3
2
1
Figure 6.3.1: Selfie Path and Settings
Figure 6.3.1.1: App - Selfie Activation
45