Oil Sump - MV Agusta Brutale 990 R Service Manual

ENGINE BLOCK

Oil sump

After having removed the oil filter (see Section E),
emove the oil sump by unscrewing the 6 mm
fixingscrews.
Replace the gasket if necessary.
D
Remove the two fixing screws and extract the oil filter
support from the engine block.
Remove the retaining spring and take out the oil
suction filter.
Check the condition of the oil intake filter and make
sure that it is free of cracks or clefts; clean it by using
compressed air at a low pressure, blown from inside to
outside.
- 34 -