Cylinder And Piston Assembly - MV Agusta Brutale 990 R Service Manual

Cylinder and piston assembly

The segments must be assembled on the piston with
the writing "R" "RN" turned upwards and by following
the outline in the figure.
Assemble the internal ring on the piston
Insert the pistons complete with segments on the
connecting rods with the arrow facing the exhaust
Insert the piston pins into the piston until beat.
Assemble the external rings.
Before securing the piston pins with the
blocking rings, cover the bed plate opening
with a clean rag to avoid any pieces from
falling into the oil cup. Always use new
blocking rings.
Assemble a new gasket between the cylinder and
crankcase.
Position the clamps onto the pistons in the direction
shown in the sketch.
Oil cylinders and clamps.
Cylinder kit
- 31 -
C