The oil pump does not require maintenance.
NOTE
Do not take the oil pump apart. Any attempts
to take the components of the water pump
apart will invalidate the guarantee.
If necessary, replace the oil pump with a new
oneavailable to rechange
Grease evenly the gasket and put into its seat
(prevently cleaned and degreased) on the oil pump.
Insert the oil pump in the crankcase.Tighten the 3
screws at 8 N·m with MEDIUM THREAD BLOCKER
carefully degreasing them before reassembly.
Reassembly the shim washer th..0,5 mm on the oil pump
axle, insert the pin, the gear, the washer th. 1,5 mm
and the seeger ring.
Lubrication
- 5 -
E