Water Pump Removing - MV Agusta Brutale 990 R Service Manual

Water pump removing

The engine does not need to be removed from
NOTE
the frame to perform this operation
Work with cold motor.
Drain liquid.
A) Loosen the clamp and remove the coupling from the
cylinder group, being careful not to damage it and drain
the cooling liquid by removing the screw (B)
B) Remove the screws (1) which fasten the pump body
to the crankcase.
C) Slide the pump out of the crankcase.
The w ater pump
maintenance. Do not take the water pump
apart. Any attempts to take the components of
the water pump apart will invalidate the
guarantee.
ENGINE BLOCK
does not require
- 25 -
B
1
A
D