Rotating The Drive Cage - HP ProDesk 600 G2 Small Form Factor Maintenance And Service Manual

Rotating the drive cage

You must rotate the drive cage to the upright position to access most computer components.
1. Prepare the computer for disassembly
2. To access internal components: Rotate the drive cage upward until it is fully open.
3. To reassemble the computer: Rotate the drive cage back down to its normal position.
CAUTION:
32 Chapter 4 Removal and replacement procedures: Small Form Factor
Be careful not to pinch any cables or wires when rotating the drive cage down.
(Preparation for disassembly on page 19).