Operating With The Power Sliding Door Switches - Toyota sienna 2004 Service Manual

Hide thumbs Also See for sienna 2004:
Table of Contents

Advertisement

NOTICE
Do not apply excessive force when
the sliding door is operated automati-
cally. Otherwise, the power sliding
door system may be damaged.
You can cause a beep to sound when the
power sliding door is opened or closed.
For details, contact your Toyota dealer.
32
04 SIENNA_U (L/O 0408)
Front overhead console
Center pillar
I n f o r ma t i o n P r o v i d e d b y :
OPERATING WITH THE POWER SLIDING
DOOR SWITCHES
To open the door, push the switch. To
close the door, push the switch once
again. The door opens and closes com-
pletely.
Switches on the front overhead con-
sole:
"
" switch—To operate the left side
door.
"
" switch—To operate the right side
door.
Switches on the center pillar:
"PWR DOOR" switch—To operate each
side door.
Opening operation can be performed by
the switches under the following condi-
tions:
D
The sliding door is unlocked.
D
The power sliding door system is on.
(The "SLIDE DOOR OFF" switch is
pushed out.)
D
The sliding door is between the fully−
closed position and half−opened posi-
tion.
2004 SIENNA from Aug. '04 Prod. (OM45422U)

Advertisement

Table of Contents
loading

Table of Contents