Seat Belt Comfort Guides - Toyota sienna 2004 Service Manual

To connect the extender to the seat
belt, insert the tab into the seat belt
buckle so that the "PRESS" signs on
the buckle−release buttons of the ex-
tender and the seat belt are both facing
outward as shown.
You will hear a click when the tab locks
into the buckle.
When releasing the seat belt, press on
the buckle−release button on the extender,
not on the seat belt. This helps prevent
damage to the vehicle interior and extend-
er itself.
When not in use, remove the extender
and store in the vehicle for future use.
04 SIENNA_U (L/O 0408)
CAUTION
D
After inserting the tab, make sure
the tab and buckle are locked and
that the seat belt extender is not
twisted.
D
Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
D
If the seat belt does not function
normally, immediately contact your
Toyota dealer. Do not use the seat
until the seat belt is fixed. It cannot
protect an adult occupant or your
child from injury.
I n f o r ma t i o n P r o v i d e d b y :

—Seat belt comfort guides

The shoulder belt comfort guide for the
outside third seats will provide added
seat belt comfort for children who have
outgrown child restraints and for small
adults. When the shoulder belt is in-
serted through the guide, the comfort
guide pulls the belt away from the neck
and head of an occupant.
For wearing the seat belt, see "—Front
and rear seat belts" on page 96 in this
Section. Make sure the shoulder
crosses the shoulder.
2004 SIENNA from Aug. '04 Prod. (OM45422U)
belt
103