To Use The Anchor Bracket - Toyota sienna 2004 Service Manual

TO USE THE ANCHOR BRACKET:

1. Remove the head restraint.
136
04 SIENNA_U (L/O 0408)
2. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 121 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
I n f o r ma t i o n P r o v i d e d b y :
3. Replace the head restraint.
2004 SIENNA from Aug. '04 Prod. (OM45422U)