Toyota sienna 2004 Service Manual page 379

6. Run−flat tire (RFT) or standard
tire—This vehicle can
equipped with either run−flat tires
(RFT) or standard tires. A "RFT"
or "DSST" mark is molded on the
sidewall of the run−flat tire. For
details, see "Run−flat tires" on
page 469.
7. Radial tires or bias−ply tires—A
radial tire has "RADIAL" on the
sidewall. A tire not marked with
"RADIAL" is a bias−ply tire.
8. "TUBELESS" or "TUBE
TYPE"—A tubeless tire does not
have a tube inside the tire and air
is directly filled in the tire. A tube
type tire has a tube inside the tire
and the tube maintains the air
pressure.
9. Load limit at maximum cold tire
inflation pressure—For details,
see "Checking and replacing tires"
on page 466.
04 SIENNA_U (L/O 0408)
10.Maximum cold tire inflation
be pressure—This means the pres-
sure to which a tire may be in-
flated. For details about recom-
mended cold tire
pressure, see "Tires" on page 491.
11. Summer tire or all season
tire—An all season tire has "M+S"
on the sidewall. The tire not
marked with "M+S" is a summer
tire. For details, see "Types of
tires" on page 392.
I n f o r ma t i o n P r o v i d e d b y :
inflation
2004 SIENNA from Aug. '04 Prod. (OM45422U)
379