Toyota sienna 2004 Service Manual page 79

D
Make sure the seat belts are not
twisted or caught under the seat
and are arranged in their proper
position and are ready to use.
D
Install each seat in the same posi-
tion from which it was removed.
Failure to do so will prevent the
occupants from using seat belts
properly.
D
Do not reinstall the seat with its
back facing forward.
D
Make sure the seat is securely
locked in the proper position.
NOTICE
Do not carry the removed seat by
holding the seat position adjusting le-
ver. Otherwise, the seat may slide and
not be installed properly. If you slide
the removed seat, return the seat to
the rear−most position before it is
installed.
04 SIENNA_U (L/O 0408)
7−passenger
side seat can be moved to the inside
when the console box is not installed
between the second seats.
2004 SIENNA from Aug. '04 Prod. (OM45422U)
I n f o r ma t i o n P r o v i d e d b y :
models only: The right
79