Acceleration/Deceleration; Changing The Preset Speed - Toyota sienna 2004 Service Manual

Introduction & Operation
J Operation Procedure
F Acceleration/Deceleration
To accelerate: Depress the accelerator pedal. (When you release the accelerator pedal, follow- up cruising or fixed speed
cruising resumes.) If there was no vehicle ahead, the vehicle will accelerate gradually to the preset speed. At this time,
depressing the accelerator pedal or pressing the control lever upward and releasing it will accelerate quickly.
To decelerate: Depress the brake pedal. (Even when you release the brake pedal, dynamic laser cruise control does not return
to follow- up cruising or fixed speed cruising. Press the control lever upward to resume follow- up- cruising or fixed speed
cruising.)
F Changing the preset speed
Using the control lever:
Press the control lever upward or downward.
1
D Press the control lever upward in the "+ RES" direction to increase the preset speed.
D Press the control lever downward in the "- SET" direction to decrease the preset
speed.
The displayed speed will increase or decrease every 5 mph (for the U.S.A.) or
5 km/h (for Canada and Mexico).
Release the control lever when the display shows the desired preset speed.
2
Using the accelerator and brake pedals:
Depress the accelerator or brake pedal to attain the desired speed.
1
Press the control lever downward in the "- SET" direction and release the lever.
2
SIENNA (QRG_U)
− 7 −
I n f o r ma t i o n P r o v i d e d b y :
To increase
the preset speed
y16067q
To decrease
the preset speed
y16064q