Download Print this page

Quick Start Guide - illy Y5 Troubleshooting Tips

Milk espresso coffee machine
Hide thumbs Also See for Y5:

Advertisement

Francis!Francis! for illy Y5 Milk Espresso coffee machine

QUICK START GUIDE

PREPARE MACHINE FOR USE
Step 1 Pre-wash water and milk tanks with soap and hot water, then rinse and dry.
Step 2 Fill water tank to max line
Step 3 Push water tank into the machine completely.
Step 4 Turn the machine power switch on. Wait until the LED cup icons no longer flash on top of the machines.
The machine will be ready in less than one minute.
Step 5 Place a large mug on the tray and press the water icon
Repeat this process until the water tank is empty, then refill to max line. Filtered water in recommended.
Step 6 Repeat step 5 by placing a mug on the tray and filling the milk tank with water and pressing the milk icon
to flush all the water out of the milk tank. This will pre-clean the milk function prior to preparing beverages.
BREW ESPRESSO
Step 1 Place an iperespresso capsule into the capsule holder by lifting the lever.
Step 2 Close the lever by pushing down completely, until tighly closed.
Step 3 Place your cup or mug in the appropriate tray.
Step 4 Select your beverage by touching the small cup
IPESPRESSO
CAPSULES
PREPARE MILK DRINKS
1
Ensure that the milk kit compo-
nents are properly assembled.
5
Attach the milk tank to the ma-
chine by pushing the exposed
tube into the black spout on
the machine to firmly attach.
2
Insert the milk kit (dispensing
spout) firmly into the hole on
the left side of the machine.
6
Place an iperespresso capsule
into the capsule holder by lift-
ing the lever. Close the lever by
pushing down completely, until
tightly closed. Place your cup in
the appropriate tray.
, without any capsules in the machine.
. Serve immediately.
3
Fill the milk tank to the max line
with cold milk.
7
Youcan easily prepare milk
based beverages by selecting
cappuccino,
latte mac-
chiato, or
steamed milk.
4
Make sure milk tube is pushed
through the opening by align-
ing the rubber tube's tab flush
to the inside of the milk lid (see
step 3 on reverse side). Check
milk tube "mouth" is protruding
on outside of lid. Place lid on
top of hte milk tank.

Advertisement

loading