Exiting Connect Copy - Ricoh DSm651 Operating Instructions Manual

Connect Copy
❖ ❖ ❖ ❖ When copying with the Stack function
(Example) Making 2 copies of each
page of a three-page original
< 1 >
3
1.
Main machine
2.
Sub-machine
Copies are delivered face-down on
both the main and sub machines.
Copies are delivered as shown in
the above illustration.
- Auto Reset when using -
- -
Connect Copy
The machine exits Connect Copy
mode automatically and returns to
the initial condition after a certain pe-
riod of time has lapsed after job com-
pletion. This is called "Auto Reset".
Note
❒ Auto Reset is based on the Auto
Reset Timer settings in User Tools
of the main machine.
❒ When the Auto Reset time of the
sub-machine lapses when it is pro-
cessing an Interrupt Copy job, the
sub-machine will return to its orig-
inal position and the Interrupt
Copy job will be cancelled.
90
< 2 >
- Auto Off - - -
The machine automatically turns it-
self after a certain period of time has
lapsed after job completion. This is
called "Auto Off". In Connect Copy
mode, the sub-machine will not turn
off automatically.
Reference
"Auto Off Timer", General Settings
Guide

Exiting Connect Copy

A A A A
Press [ ] on the main ma-
chine.
The machine returns to standard
copying mode.
Note
❒ Settings made on the main ma-
chine during Connect Copy
mode remain effective.
❒ If you press the { { { { Clear Modes} } } }
key on the main machine, Con-
nect Copy mode is cancelled
and the main machine returns
to its initial condition.