B Loading Paper; Loading Paper In Tray 1 (Tandem Tray) - Ricoh DSm651 Operating Instructions Manual

Troubleshooting

B Loading Paper

B
B B
Note
❒ You can change the paper size in
tray 2 and 3. See p.115 "Changing
the Paper Size".
Reference
For details about paper types and
sizes, see p.155 "Copy Paper".
Important
❒ Do not stack paper higher than the
limit mark inside the tray.
Note
❒ Shuffle the paper before loading.
5
❒ Straighten curled or warped paper
before loading.
Loading Paper in Tray 1
(Tandem Tray)
Important
❒ When paper on the right side in
tray 1 runs out, paper on the left
will automatically be shifted to the
right. While the paper is being
moved, a message will be dis-
played instructing you to wait. Do
not pull out the tray.
Note
❒ You can load paper even while
making copies from tray 1. During
copying, you can pull out the left
half of the tray.
98
A A A A
Pull out the paper tray until it
stops.
B B B B
Square the paper, and then load it
in the tray.
When the whole tray is pulled out
A Load the paper.
Important
❒ For the stack on the right,
align the right edge of the
copy paper to the right edge
of the tray. For the stack on
the left, align the left edge of
the copy paper to the left
edge of the tray.