Loading Paper In The Interposer - Ricoh DSm651 Operating Instructions Manual

Troubleshooting
D D D D
Load paper by repeating steps
C C C C
and .
Note
❒ The tray can hold up to 4,000
sheets.
E E E E
Close the top cover of the large ca-
pacity tray (LCT).
Loading Paper in the
Interposer
Important
❒ Load paper on the side already
printed (the side you want as
5
front).
❒ Load paper in the interposer in the
same orientation as paper in the
paper tray.
❒ The staple or punching location
will be on the left side of the paper,
when you are facing the machine.
❒ Do not place anything on top of or
leave documents on the sensor.
This may lead to the paper size not
being correctly scanned or paper
jams.
❒ When using the Z-fold function,
the paper in the interposer must be
of the same size as the prints after
they have been Z-folded. If the pa-
per in the interposer is larger than
the Z-folded sheets, a misfeed
might occur.
100
A A A A
B B B B
Load the paper.
B B B B
Adjust the paper guides to the pa-
per size.