Product Specifi Cation - Danfoss 103E7 Installation & User's Instructions

Installation Instructions
Please Note:
This product should only be installed by a qualifi ed
electrician or competent heating installer, and
should be in accordance with the current edition of
the IEEE wiring regulations.
Product specifi cation
Specifi cation
Power supply
Switching action
Switch rating
Setting/Running Accuracy
Power Reserve
Enclosure Rating
Max. Ambient Temperature
Dimensions, mm (W, H, D)
Design standard
Control Pollution Situation
Rated Impulse Voltage
Ball Pressure Test
230Vac ± 15%, 50 Hz
1 x SPST, Type 1B
264Vac, 50/60Hz, 3(1)A
±1 min./month
Minimum 24 hours
IP30
45°C
102 x 136 x 47
EN 60730-2-7
Degree 2
2.5kV
75°C
3