ITS Telecom CGW-D Installation And Operation Manual page 38

Item Function
DTMF Settings
DTMF Sensitivity Contains a value of the DTMF sensitivity level of
the gateway, which can be dialed from the PSTN.
Applicable to PBX and cellular networks.
DTMF Amplitude Contains a value of the amplitude of DTMF tones,
which are dialed by gateway to PSTN or PBX
directory.
DTMF Off Time Contains a value of the off-time cadence of DTMF
tones (in msec.), which will be dialed by gateway.
DTMF On Time Contains a value of the on-time cadence of DTMF
tones (in msec.), which will be dialed by gateway.
Call Waiting Tone Enables a tone indicating that another call is
pending. During a cellular call, a new cellular call
will be indicated by the call waiting tone, whereas
a new PSTN call will be rejected.
Gateway Dial Enables the gateway to generate a dial tone for
Tone outgoing gateway calls as well as to the home
phone, PBX trunk or PBX extension directions for
future dialing.
CPT Settings
Busy 1 Off Time Contains a value in msec for off-time of type-1
busy tone cadence.
Busy 1 On Time Contains a value in msec for on-time of type-1
busy tone cadence.
Busy 2 Off Time Contains a value in msec for off-time of type-2
busy tone cadence.
Busy 2 On Time Contains a value in msec for on-time of type-2
busy tone cadence.
Busy Detection Contains a value in sec for gateway to detect a
Timer busy tone and disconnect call.
Tone Detection Contains a value in sec for gateway to detect a
Timer continuous tone signal.
CGW-D
Default Range/
Option
5 1-9
5 1-9
200
100
Selected
Selected
500
500
240
240
6
6
3-13