Mechanical And Environmental Specifications; Jumpers And Connectors - Advantech ASMB-585 User Manual

1.3.7

Mechanical and Environmental Specifications

 Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)
 Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
 Humidity: 5 ~ 95% non-condensing
 Power supply voltage: +3.3 V, +5 V, ±12 V, 5 VSB
 Power consumption:
Max. load: +3.3 V @ 17.57 A, +5 V @ 20.5 A, +12 V @ 40.01 A, +5 VSB @ 2 A,
-12 V @ 0.5 A
 Board size: 228.6 x 228.6 mm (9.6" x 9.6")
 Board weight: 0.5 kg (1.68 lb)
1.4

Jumpers and Connectors

Connectors on the ASMB-585 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers that are
used to configure your system for your application.
The tables below list the function of each of the jumpers and connectors. Later sec-
tions in this chapter give instructions on setting jumpers. Chapter 2 gives instructions
for connecting external devices to your motherboard.
Table 1.1: Jumper list
Label
JCMOS1
JME1
JWDT1
CPUFAN_SEL1,
SYSFAN_SEL1
PSON1
JCASE1
JPEG1, JPEG2
JTHR_SEL1
JGREEN1
JUSB1
JUSB2
ASMB-585 User Manual
Function
CMOS clear
Intel ME Disable Jumper for ME/BIOS update
Watch Dog Reset
FAN PWM(1-2)/DC mode selection(2-3)
AT(1-2) / ATX(2-3)
Case Open
PCIEX16_SLOT6 PCIe Link switch between x16 or x8x8
or x8x4x4
To select on board or external thermometer
Enable/Disable deep sleep mode
Rear window USB2.0/3.0 port power source switch
between +5 VSB and +5 V
On board USB2.0/3.0 port power source switch between
+5 VSB and +5 V
4