Table of Contents
Advertisement
2.1
Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed, you may need to par-
tially remove a card to make all the connections.
2.2
USB Ports (LAN1_USB12,LAN2_USB56, LAN34,
USB7~13)
ASMB-585 provides up 13 USB ports. USB7~13 are USB 2.0 ports supporting trans-
mission rates up to 480 Mbps, and USB1~6 are USB 3.0 ports supporting transmis-
sion rate up to 5Gbps.These ports support Plug & Play and hot swapping for up to
127 external devices and are able to be disabled in BIOS menu.
The ASMB-585 is equipped with two (G2 sku) or four (G4 sku) high-performance
1000 Mbps Ethernet LANs. They are supported by all major network operating sys-
tems. The RJ-45 jacks on the rear plate provide convenient 1000 Mbps operation.
If all USB ports will be used, USB power is recommended to switch to +5V instead of
+5VSB.
USB11_12
USB9_10
USB7_8
USB3_4
USB13
LAN 1/2/3/4 LED Indicator
LAN Mode
1 Gbps Link on
100 Mbps Link on
10 Mbps Link on
Active
ASMB-585 User Manual
LAN2_
USB5_6
LAN Indicator
LED1 Green on (left)
LED1 Orange on (left)
LED1 N/A (left)
LED2 Green flash (right)
14
LAN1_
USB1_2
LAN3_4
Advertisement
Table of Contents
