Memory Expansion; Installing And Removing Memory Modules - Fujitsu Siemens Computers Lifebook E Series Easy Manual

Hide thumbs Also See for Lifebook E Series:

Table of Contents

Working with your Notebook

Memory expansion

The notebook must be switched off when installing/removing the memory modules, it

must not be in Suspend mode.

Sufficient memory space must be available on the hard disk (at least the size of the main

memory +16 Mbytes) for the current data to be saved in Save to Disk mode.

Install only memory modules that satisfy the requirements and rules governing safety,

RFI and electromagnetic compatibility and relating to telecommunications terminal

equipment (see the

Use only memory expansions which have been released for your

and 512 Mbyte modules, SD RAM, JEDEC 144 pin SO DIMM, 3.3 V).

Never use force when installing or removing memory modules.

Make sure that foreign objects do not fall into the memory module compartment.

The main memory of your notebook can be expanded up to 1 Gbyte using two 512 Mbyte memory

modules.

Switch the notebook off.

Unplug the power adapter from the mains outlet.

Close the LCD screen so that it locks into place.

Disconnect all cables connected to the notebook.

Place the notebook upside down on a flat surface.

Remove the battery.

"Important

notes" chapter).

Remove the screw (1).

Lift the cover off the notebook in the

direction of the arrow (2).

Remove the clear plastic protective cover.

Memory expansion

(128, 256,

LIFEBOOK

A26391-K114-Z120-1-7619

Table of Contents