Save And Exit Setup; Exit Without Saving - DFI G586OPC/E User Manual

Save & Exit Setup
When all the changes have been made, highlight "Save
& Exit Setup" and press <Enter>. The message below
will appear:
Type "Y" and press <Enter>. The following message
will appear:
Type "Y" and press <Enter>. The modifications you
have made will be written into the CMOS memory, and
the system will reboot. You will once again see the
initial diagnostics on the screen. If you wish to make
additional changes to the setup, press <Ctrl> <Alt>
<Esc> or <Del> simultaneously after memory testing is
done.

Exit Without Saving

When you do not want to save the changes you have
made, highlight this option and press <Enter>. The
message below will appear:
Type "Y" and press <Enter>. The system will reboot
and you will once again see the initial diagnostics on the
screen. If you wish to make any changes to the setup,
press <Ctrl> <Alt> <Esc> or <Del> simultaneously after
memory testing is done.
Save to CMOS and Exit (Y/N)? N
Reboot System (Y/N)? N
Quit Without Saving (Y/N)? N
G586OPC/E
75