PCI/ISA System Board
Date and Time
Sets the time and date for the system. Press <F3> for
the calendar. These items cannot be altered; they are
detected and displayed automatically.
Hard Drive Type
This allows you to enter the appropriate specifications
for the type of hard disk drive(s) installed in your
system. Under the "Type" category, you can select Auto,
User, one of 46 predefined drive specifications or None.
Auto
This option indicates that the parameters for your hard
disk drive(s) will be automatically detected and dis-
played when you boot your system.
By default, the LBA mode is selected for a hard disk
drive larger than 528 Megabytes. If you decide not to
accept the LBA mode, you can either specify your
selection in the "IDE HDD Auto Detection" menu, or
use the User option described below.
62