Chipset Features Setup - DFI G586OPC/E User Manual

PCI/ISA System Board
If you choose "System" in the Security Option, you will
be prompted for a password every time you cold boot
your system or access setup. If you choose "Setup", you
will be prompted for a password only when trying to
access setup.
Use the arrow keys to move the highlight bar to the
option you wish to change or modify. Use the <Page
Up>, <Page Down>, <+> or <-> keys to make the
corresponding changes. Press <Esc> after making the
changes to return to the main menu.

Chipset Features Setup

The G586OPC uses the OPTi Viper-M chipset. The
Chipset Features Setup allows you to modify some
functions to optimize system performance. It also allows
you to enable, disable or select the port address of the
built-in serial ports, parallel port, floppy disk controller
and hard disk controller.
If you press <Enter>, a screen similar to the one on the
next page will appear. Use the arrow keys to move the
highlight bar to the option you wish to change or
modify. Use the <Page Up>, <Page Down>, <+> or <->
keys to make the corresponding changes.
If the changes you made are incorrect or you change
your mind, press <F6> or <F7> to return to the default
settings. Press <Esc> after making the changes to return
to the main menu.
66