Using As A Remote Shutter Release - Vello FreeWave Captain User Manual

USING AS A REMOTE SHUTTER RELEASE

Mounting the Receiver On-Camera
To mount the receiver to your camera,
slide the device into the camera's hot-
shoe mount. Turn the receiver's tightening
ring to secure it to the camera.
Connecting the Receiver to Your
Camera
A wired connection is required to connect
the receiver to your camera. With all of
the devices off, connect the shutter release
cable to your receiver by inserting the
2.5 mm end into the receiver's shutter
release [ ] port. Insert the other end
into the camera's shutter release port.
Note: To use the FreeWave
Captain in remote shutter
release function with a
flash, mount your receiver
onto a bracket or light
stand. Connect the receiver
to the camera via the
shutter release cable and
mount your flash onto
your camera's hot shoe.
23