Add And Register Handsets; To Register A Handset To Your Telephone Base - AT&T SB67118 User Manual

Getting started

Add and register handsets

Your telephone can support up to 10 cordless handsets or nine cordless
handsets and one cordless headset. You can add new handsets and headset
(AT&T model SB67108 and TL7600, sold separately) to the SB67118 at any
time, but each new handset or headset must be registered with the telephone
base before use. You must register each handset and headset separately.
The handset provided with your SB67118 is pre-registered as Handset 1.
Additional handsets are assigned numbers in the order they are registered
(Handset 2 to Handset 10).
If the handset does not have enough power to proceed with the registration,
you need to charge the new handset for at least five
minutes (see Battery installation and charging in the
SB67108 cordless handset manual). Start registration
when the handset screen shows Press MENU on BS, sel
Registration & sel Register HS. Then put HS in cradle.

To register a handset to your telephone base

1. Make sure the handset is out of the charger and the screen shows
Press MENU on BS, sel Registration & sel Register HS. Then put HS in
cradle. before you begin registration.
2. On the telephone base, press MENU
3. Scroll down to Registration and press
4. Press ENTER again to select Register HS.
MENU/
5. Place the unregistered handset into the cradle. The
telephone base screen shows Handset registering. It
takes up to 60 seconds
There is a beep sound when the registration is successful.
The handset shows Handset registered, and then shows
X:Handset X (X represents the extension number [1-0];
Handset X represents the default handset name).
NOTES:
1. If the registration is not successful, the telephone base screen displays
Error. To reset the handset, remove the handset from the cradle. Try the
registration process again.
2. Please make sure to remove all unregistered system handsets or cordless
headset from the cradles before registering a new handset.
/ENTER.
MENU/
to complete the registration.
10
Press MENU on BS,
sel Registration
& sel Register
HS. Then put HS
in cradle.
COVM
Speed dial setup
Customer support
Registration
>
ENTER.
Register HS
>
Cordless headset
Deregistration
Handset
registering
Handset
registered
2:Handset 2
Set date & time
Charging