Register A Cordless Device - AT&T SB67030 User Manual

Register a Cordless Device

The following procedure describes registering the Cordless Handset. The process is identical for the Cordless Headset, except in
Step 4 you press 2 to register the Cordless Headset, rather than 1.
To register a cordless device:
Cordless Handset Registration
Cordless Handset is currently
Not Registered.
Place Cordless Handset in charger.
Press Register to begin process.
Register
Figure 53. Handset Not Registered
Cordless Handset Registration
Cordless Handset is currently
Registered.
Press DeReg to deregister the Cordless
Handset.
DeReg
Figure 55. Handset Registered
Settings
AT&T SB67030 Deskset User's Guide
1. Press MENU to display the Menu screen shown in
2. Press 2 on the dial pad to display the User Settings menu shown in
page 48.
3. Press 5 to display the Cordless Settings menu shown in
4. Press 1 to display the Cordless Handset
Registration screen shown in Figure 53.
Quick
5. Press
Dial
screen shown in Figure 54 appears while the
Exit
Deskset searches for the Handset.
When the registration is complete, Cordless
Handset is currently Registered displays,
as shown in Figure 55.
6. Press
displays, as shown in
Quick
Dial
Exit
. The Registration in Progress
. The Cordless Settings menu
Figure 52 on page
NOTE: For more information on registering and deregistering
Cordless Handsets and Headsets, see the user's guides for
those products.
See "AT&T SB67040 Cordless Accessory Handset User's
Guide" and "AT&T TL7600 Cordless Headset User's Guide".
51
Figure 24 on page
Figure 52 on page 50
Cordless Handset Registration
Cordless Handset is currently
Not Registered.
Registration in Progress...
Place Cordless Handset in charger.
Press Register to begin process.
Register
Figure 54. Registration in
50.
Progress
34.
Figure 47 on
Quick
Dial
Exit