Answer A Transferred Call - AT&T SB67118 User Manual

Telephone base operation
Call transfer
Press or
press ENTER.
MENU/
3. The current line is put on hold. The destination extension
rings and the call is answered by pressing
PHONE/
FLASH
announce the call. There is an intercom call between the
corded handset and the extension.
4. Put the corded handset on the telephone base or press
SPEAKER to hang up. The outside call is automatically
transferred to the desired extension.
-OR-
You can resume the call by pressing the corresponding
flashing line key LINE 1-LINE 4 before the desired
extension answers the call.
You hear a beep
answered (To turn off the reminder beep, see Hold reminder on page 22).
NOTES:
1. If the desired extension does not answer the intercom call within one minute, the extension rings as
an incoming call to remind the extension user.
2. If the outside call is put on hold for 10 minutes, it is automatically transferred to the auto attendant.
The telephone base returns to idle mode.

Answer a transferred call

When you hear a short intercom ring from the telephone base:
Lift the handset to intercom with an extension. You can talk privately with
the extension before picking up the outside call that is waiting on hold. Press
the blinking LINE 1-LINE 4 when you are ready to talk to the outside call.
Other options for answering the transferred call:
• To answer using the telephone base speakerphone, press
before pressing LINE 1-LINE 4.
To answer hands-free using the corded headset, press HEADSET before
•
pressing LINE 1-LINE 4.
• To answer hands-free using the cordless headset, press ON
headset before pressing LINE 1-LINE 4.
to scroll to the desired extension, then to scroll to the desired extension, then
on the cordless handset. You can
tone every 30 seconds when a transferred call has not been
49
Transfer to:
Handset 1
>
Handset 2
Handset 3
PHONE/FLASH
1
Intercom 00:00:28
Hold Line 1
SPEAKER
on the
/OFF