Appendix; Adding And Registering Handsets/Headsets; Register A Handset To The Telephone Base - AT&T CL83113 User Manual

Appendix

Adding and registering handsets/headsets

Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model
CL80113, sold separately) or up to ten cordless handsets and two cordless
headsets (sold separately). Visit
for a list of compatible DECT 6.0 cordless headsets. Each new handset or
headset must be registered to the telephone base before use. You must
register each handset or headset separately.
To register a cordless headset to this telephone system, please refer to the
user's manual of the cordless headset for more details. To register a cordless
handset, see below.
The handsets provided within your product box are already registered as
HAND�ET 1 and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to HAND�ET 12).

Register a handset to the telephone base

1. Before you begin registration, make sure the handset is out
of the telephone base or charger and shows To register H�,
see manual.
2. Put the handset you wish to register on the telephone
base cradle.
3. Both the handset and the telephone base show
Registering... �lease wait and the IN U�E light on the
telephone base turns on. HAND�ET X Registered appears
on both the handset and the telephone base screens
(HAND�ET represents the handset name, X represents the
handset number). Both the handset and the telephone base
beep and the IN U�E light turns off. The handset is now
registered with the telephone base.
www.telephones.att.com/headsets
97
To register HS,
see manual.
Registering...
Please wait
HANDSET X
Registered