Telephone base operation
Telephone base basic operation
To override automatic line selection, press LINE 1-LINE 4
for the desired line, then lift the handset.
NOTE: If there is no telephone number stored in the speed dial location,
No number displays on the screen.
Answering a call
To answer a call:
•
Lift the handset, press
registered cordless headset.
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.
Temporary ringer silencing
Press MUTE while the telephone is ringing to silence the
ringer temporarily on the telephone base only. This turns off
the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
Last number redialing
The last 10 telephone numbers dialed (up to 32 digits) are stored in
system memory.
To view the 10 most recently dialed numbers:
REDIAL to enter the redial list and display the
1. Press
PAUSE/
most recently called number.
2. Press
or
, or press
other recently called numbers.
3. Press EXIT to exit the redial list.
To redial a number:
•
To dial the displayed number, lift the handset, press
SPEAKER or HEADSET.
SPEAKER, HEADSET or the ON
REDIAL repeatedly to view
PAUSE/
lift the handset, press
38
Line 3
8888832445
Speed dial 4
No number
button on a
/OFF
MUTE
PAUSE/REDIAL
8888832445