Harris ENC6800+ Installation And Operation Manual page 39

Table 3-3. Card-Edge Parameter Options— ENC/ENS6800+ Modules(Continued)
Bank,
Rotary Parameter Name
Switch
1, 8 Loss of Video Output
(ENS6800+ only)
1, 9 Test Signal Select
(ENS6800+ only)
1, A Test Signal Enable
(ENS6800+ only)
1, B For Future Use
1, C XCR Function Block
(ENS6800+ only)
1, D XCR Function Enable
(ENS6800+ only)
1, E XCR Filter Select
(ENS6800+ only)
1, F For future Use
Table 3-4. Card Edge Parameter Options—Groups 2 and 3 (D1-525)
Bank,
Rotary Parameter Name
Switch
2, 0 Bank Select
2, 1 Field Select
ENC/ENS6800+ Installation and Operation Manual
Function
Selects the output video mode when the
input video is disrupted
Selects the type of internal test signal
Controls the activation of the internal
test signal generator
Controls the insertion of the cross-color
reduction circuit in the signal
processing path (not applicable to
PAL-B)
Controls the activation of cross-color
reduction (not applicable to PAL-B)
Selects the type of cross-color reduction
(not applicable to PAL-B)
Function
Selects a bank
Selects a field for parameters in groups
2 and 3
Chapter 3: Operation
Parameter Option
• Pass
• Black
• Freeze
• Color Bars
• Mod Ramp
• MultiBurst
• Pulse & Bars
• Off
• On
• Remove
• Insert
• Disabled
• Enabled
• Filter 1
• Filter 2
• Filter 3
Parameter Option
• Bank 0
• Bank 1
• Bank 2
• Bank 3
(These parameters wrap)
• Field 1
• Field 2
25