ENC/ENS6800+ Installation and Operation Manual
•
Automatic selection between NTSC, PAL-M and PAL-B standards,
with settings shadowed and restored
•
Genlock input on module, or frame genlock to be used for reference
•
Selection between black, pass, or freeze when input signal is lost
•
Jitter removal
•
EDH detection
•
Vertical blanking field/line/mode control: lines 10 to 21
(NTSC/PAL-M), lines 6 to 23 (PAL-B)
•
Adjustable level controls for luminance, chrominance, and black
•
Adjustment for ±180 degrees chrominance phase
•
SCH offset (0/180 for NTSC, 0/90/180/270 for PAL)
•
Adjustment for ±45 degrees fine phase
•
Various test signals: color bars, modulated ramp, multiburst,
pulse/bars
•
Pedestal on/off selection (with starting line selection)
Full control support via +Pilot Lite
•
TM
CCS Pilot
and CCS Navigator
Chapter 1: Introduction
TM
(included) or optional
TM
(requires ICE6800+)
3