AT&T SB67108 User Manual page 93

Dect 6.0 expansion handset for use with at&t model sb67118
Hide thumbs Also See for SB67108:
Table of Contents

Advertisement

Appendix
Troubleshooting
My calls cut in
and out while I'm
using my cordless
handset.
Other electronic products can cause
interference with your cordless phone. Try
installing your phone as far away from the
following electronic devices as possible:
television sets, VCRs, or other cordless
telephones.
Do not install this phone near a microwave
oven or on the same electrical outlet. You
might experience decreased performance
while the microwave oven is operating.
If you plug your phone in with a modem
or surge protector, plug the phone (or
modem/surge protector) into a different
location. If this does not solve the problem,
relocate your phone or modem farther apart
from one another, or use a different surge
protector.
Relocate your telephone base to a higher
location. The phone might have better
reception when installed in a high area.
If the other phones in your building are
having the same problem, contact your
telephone service provider (charges may
apply).
Excessive background noise will cause
a speakerphone to fade in and out. Try
controlling the background noise by
turning off any audio devices near the
speakerphone. Also, try to avoid interrupting
the person at the other end of the
conversation while they are speaking. If
background noise cannot be controlled, you
should stop speakerphone operation and
return to normal handset mode.
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF