Line Selection; Change Handset Name - AT&T SB67108 User Manual

Getting started
Handset setup

Line selection

You can select the default telephone line to be used when you make
outgoing calls. This handset comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select
a particular line, choose Line 1, Line 2, Line 3 or Line 4.
1. When the handset is idle, press MENU/
2. Press DIR or CID
Press /ENTER.
MENU
3. Press DIR or CID
Press /ENTER.
MENU
DIR or CID
4. Press
Line 2, Line 3 or Line 4.
/ENTER to save the setting and return
5. Press
MENU
to the previous menu. There is a confirmation tone. To exit without
making changes, press

Change handset name

You can create a handset name for each registered handset.
1. When the handset is idle, press MENU/
DIR or CID
2. Press
/ENTER.
Press
MENU
DIR or CID
3. Press
/ENTER.
Press
MENU
4. Change the handset name when prompted.
• Press or
right.
• Use the dial pad to enter a name (up to 13
characters). Each time you press a key, a character on that key
appears. Additional key presses produce other characters on that
key. See the chart on page 45.
• Press
OFF
• Press and hold
to scroll to Handset setup.
to scroll to Line selection.
to select Auto, Line 1,
OFF
to scroll to Handset setup.
to scroll to Handset name.
to move the cursor to the left or
/CLEAR to backspace and delete characters.
/CLEAR to delete all characters.
OFF
ENTER
/CLEAR.
ENTER
16
.
LCD contrast
Key tone
Language
>Line selection
Back
Line selection
:Auto
Back
.
Key tone
Language
Line selection
>Handset name
Back
Enter HS name:
Handset 1
Back