Save A Call Log Entry To The Directory - AT&T SB67108 User Manual

Caller ID
Caller ID operation

Save a call log entry to the directory

1. When in the call log, press
wish to save.
Press the Edit softkey to select the displayed entry.
2.
Enter phone #: displays.
3. Use the dialing keys to edit the number.
• Press
OFF
characters.
• Press and hold
characters.
• Press or
• Press
REDIAL
pause (see page 45).
Press the Flash softkey to enter a flash (see page 46).
•
4. Press /ENTER to move to the name. Enter name: displays.
MENU
• Use the dial pad keys to add characters (see page 45).
• Press
OFF
characters.
• Press and hold
characters.
5. Press /ENTER to save the new directory entry. There is
MENU
a confirmation tone. To exit without making changes, press
/CLEAR.
OFF
NOTE: You will need to change how a caller ID number is dialed if the entry
does not appear in the correct format. Caller ID numbers might appear with an
area code that might not be necessary for local calls, or without a 1 that might
be necessary for long distance calls (see Make a call log entry ready to dial on
page 54).
/CLEAR on the handset to backspace and delete
/CLEAR on the handset to delete all
OFF
to move the cursor to the left or right.
/PAUSE to enter a three-and-a-half second dialing
/CLEAR on the handset to backspace and delete
/CLEAR on the handset to delete all
OFF
DIR or CID
to browse the entry you
56
dialed if the entry if the entry