AT&T SB67108 User Manual page 72

Answering system
Remote access
7
8
9
*
4. Hang up to end the call and save all undeleted messages.
Cut out and carry the remote access wallet card at the back of this
user's manual for quick reference.
NOTES:
1. If the auto attendant is active, enter your extension number, wait for your outgoing
message to begin, then enter your remote access code.
2. If you do not enter a valid remote access code, the answering system answers the call
as usual and all the voice and digits entered will be recorded as message stored in your
general mailbox.
3. If you do not enter any remote access code, the answering system announces "Thank
you for calling," and the call is terminated.
4. When there is no new message or all the new messages are played during remote
access, you hear a help menu listing all features and commands. If there is no command
after help menu is played three times, the call ends automatically.
5. If you press 4 within five seconds of each message playback start, the previous message
plays instead of repeating the current message.
• Press to transfer the current message (during
playback):
Press the handset number (1-9) or star (*) for the
base, then press pound (#) to transfer a message
to the destination mailbox (This option is only
available when transferring of message).
Press to change the personal announcement (This
option is only available to handset mailboxes).
Press to change to the general delivery mailbox (This
option is only available to handset mailboxes).
Press to end the call.
66