Create Directory Entries; Create And Store A Directory Entry - AT&T SB67108 User Manual

Directory

Create directory entries

Create and store a directory entry

Use the following steps to store a name and number in the directory.
1. When the handset is idle:
• Press
MENU
-OR-
• Press DIR to enter the directory.
2. Press the Add softkey to add an entry.
3. Enter or change the telephone number (up to 32 digits) using the
dial pad when prompted.
• Press or
right.
• Press
OFF
and delete characters.
• Press and hold
characters.
• Press
REDIAL
pause (see page 45).
• Press the Flash softkey to enter a flash (see page 46).
• Press the Back softkey to return to the previous screen.
NOTE: If the telephone number in the directory exceeds 16 digits, < appears in front
of the telephone number. Press < to move towards the beginning of the telephone
number or press > to move towards the end of the telephone number.
4. Press /ENTER to save the number.
MENU
5. Enter the name when prompted.
• Use the keypad to enter a name (up to 16
characters). Each time a key is pressed, the
character on that key appears. Additional key
presses produce other characters on that key. See the chart on
the next page.
/ENTER twice to select Directory.
to move the cursor to the left or
/CLEAR on the handset to backspace
/CLEAR on the handset to delete all
OFF
/PAUSE to enter a three-and-a-half second dialing
44
Directory
2 entries
Add Del All
Enter phone #:
8888832445
Back Flash
Enter name:
Robert Brown
Back