AT&T SB67108 User Manual page 92

Dect 6.0 expansion handset for use with at&t model sb67118
Hide thumbs Also See for SB67108:
Table of Contents

Advertisement

Appendix
Troubleshooting
The cordless handset may be too far from
the telephone base.
Charge the battery in the cordless handset
for at least 16 hours. For optimum daily
performance, return the cordless handset to
the charger when not in use.
You may have too many extension phones
on your telephone line to allow all of them
to ring simultaneously. Try unplugging some
of the other phones.
The layout of your building might be
limiting the operating range. Try moving
the telephone base to another location,
preferably on an upper floor.
If the other phones in your building are
having the same problem, contact your
telephone service provider (charges might
apply).
Test a working phone at the phone jack.
If another phone has the same problem,
contact your telephone service provider
(charges might apply).
Other electronic products can cause
interference with your cordless phone.
Try installing your phone as far away as
possible from electronic devices such as
television sets, VCRs, or other cordless
telephones.
Reinstall the battery, and place the cordless
handset in the charger. Wait for the cordless
handset to re-establish its connection with
the telephone base. Allow up to one minute
for this to take place.
Your line cord might be malfunctioning. Try
installing a new line cord.
86

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF