Installing An Xseries 3-Pack Ultra160 Hot-Swap Expansion Kit - IBM eServer 232 xSeries User Reference Manual

11. If the drive is a SCSI device:
12. Connect a power cable to the back of the drive. Power cables for non-hot-swap
13. If you are installing another non-hot-swap drive, do so at this time. Otherwise,
14. If you have other options to install or remove, do so now; otherwise, replace the

Installing an xSeries 3-Pack Ultra160 Hot-Swap Expansion Kit

i t - s w a p e x p a n s i o n k I n s t a l l i n g a h o t You can install an xSeries 3-Pack Ultra160 Hot-Swap Expansion Kit in your server to
support three additional hot-swap hard disk drives.
Note: The illustrations in this document might differ slightly from your hardware.
To install an xSeries 3-Pack Ultra160 Hot-Swap Expansion Kit:
1. Review the information in "Before you begin" on page 38, in "Safety information"
2. Turn off the server and peripheral devices and disconnect all external cables and
3. Release the sidelights to remove the filler panels from the bays below the CD-
4. Refer to the documentation provided with the option to assemble the hot-swap
60
IBM xSeries 232: User's Reference
a. Make sure the drive is not a hard disk drive.
b. Connect one of the connectors on the SCSI cable to the back of the drive.
c. Connect the other end of the SCSI cable to the SCSI channel B connector on
the system board, or to an optional SCSI adapter, as appropriate. See
"System board internal cable connectors" on page 31 for the location of the
SCSI connectors. See also "Ultra160 SCSI ports" on page 85 for information
about SCSI connections and devices.
drives come installed in your server. The connectors are keyed and can be
inserted only one way.
continue with the next step.
cover (see "Installing the cover" on page 73 for details).
on page 40, and "Handling static-sensitive devices" on page 39.
power cords; then, remove the cover and bezel. (See "Removing the cover, door,
and bezel" on page 46.)
ROM drive.
expansion option.
Filler panels
Hot-swap
expansion option