Installing Internal Drives; Internal Drive Bays - IBM eServer 232 xSeries User Reference Manual

Installing internal drives

n a l d r i v e s I n s t a l l i n g i n t e r Different types of drives enable your system to read multiple types of media and store
more data. Several types of drives are available, such as:
•
•
•
•

Internal drive bays

Internal drives are installed in bays. The bays of the xSeries 232 are in the front of the
server, as shown in the following illustrations.
Note: The illustrations in this document might differ slightly from your hardware.
Note: The SCSI IDs for the slim-high and hot-swap drives are on a label on the
Diskette (already installed)
Hard disk
CD-ROM (already installed)
Tape, including DLT
Tower model
Non-hot-swap
bay A
Non-hot-swap
bay B
Non-hot-swap
bay C
Hot-swap bays
bezel, immediately adjacent to the hot-swap drive bays.
Non-hot-swap
bay D
SCSI ID 5
Hard disk
activity light
Hard disk
status light
SCSI ID 4
SCSI ID 3
SCSI ID 2
SCSI ID 1
SCSI ID 0
Chapter 5. Installing Options
53