Measuring Current - Iso-Tech IDM 507 Instruction Manual

Measuring Current

˙ The basic operations are same as voltage function.
Measuring Frequency
˙ When measuring voltage or current, press the Hz button to
measuring the frequency for voltage or current.
˙ Press the Hz button again to exit this mode.
High Frequency Reject (Low Pass Filter)
˙ When measuring voltage or current, press the HFR button to
equip with low pass filter.
˙ Press the HFR button again to exit this mode.
˙ The cut-off frequency (-3dB point) is at 800Hz.
6