Table of Contents
Advertisement
Simulate Mode
˙ When meter in the simulate mode, it
supply (12V to 48V) to drive the DC current output.
˙ To operate in the simulate mode, put the both probes in mA
terminal (Simulate +) and COM terminal (Simulate -).
Then the meter will automatically enter the simulate mode.
˙ Do not turn the rotary when the probe in the A terminal.
This action maybe caused > 30mA to pass through the loop
circuit.
˙ The simulate mode can work in both
output & Auto DC output.
˙ In auto DC current output mode, you can press the HOLD
button to pause / continue the output.
used external power
modes: Adjustable DC
11
Advertisement
Table of Contents
